Horizontal Single Axis
Tracking Systems

AttributesSpecifications
  • Surface Area   215 s.f.
  • Tracking Axis Single Axis Automatic Tracking (East - West)
  • Maximum Angle    40-degree in both directions
  • Drive Design (Actuators)       DC 24V, 18" stroke.  2500-3000 RPM 1.8 ~
         4.5 mm/sec
  • Module Support Structure    Anodized Aluminum
  • Module attachment       Bolting to Aluminum rails
  • Materials        Hot Dip galvanized steel
  • Wind load resistance    90 mph
  • Wind Protection    Optional; array automatically stows at 0° at
        pre-programmed wind speed
  • Control Method      Calendar & timer (open-loop)
  • Weight    770 lbs



Dual Axis Tracking System

Model  SE-200SE-300     SE-400
  SPECIAL ORDER
Max peak capacity     1.5 KW3 KW   7.5 KW
Max Surface       130 s.f.215 s.f.538 s.f.
Position Accuracy      +/- 0.15°
Tilting Drive (Actuator)      DC 24V, 2500-3200 RPM, 1.8-4.5 mm/sec, 24" or 36"
                                          stroke
Azimuth Drive                    Worm gear and worm shaft mechanism, DC motor;
(slewing drive)                   reduction ration = 41.750:1
Tilting Angle              0°- 70°
Azimuth Angle    0° - 270°

    SE-200SE-300SE-400 - SPECIAL ORDER
Dynamic Load     220 lbs             1760 lbs           5720 lbs
Static Load  2200 lbs            3300 lbs                 11000 lbs
Weight 440 lbs                     1100 lbs                   4400 lbs
 

©Copyright 2011 Sunflower Energy™